Tool · building physics

Thermal resistance calculator R

How do you calculate the thermal resistance R of a layer?

The thermal resistance of a homogeneous layer is calculated by dividing its thickness (converted to metres) by the thermal conductivity of the material: R = (e/1000)/λ, with e in millimetres and λ in W/(m·K). The result is expressed in m²·K/W. For example, 15 mm of a material with λ = 0.051 gives R = 0.015 / 0.051 ≈ 0.29 m²·K/W. The higher R is, the more the layer slows the heat flow.

Example value pre-filled: λ = 0.051 — the least favourable declared λD value from the Pro-Tech® ETA 20/0342. Your design office can use the material's real value. This field is free: enter the λ of any insulant.

—
Thermal resistance R (m²·K/W)

The formula explained

For a homogeneous layer, the thermal resistance depends only on the thickness crossed and on the conductivity of the material:

R = e / λ  (R in m²·K/W, e in m, λ in W/(m·K))

The tool above first converts the thickness from millimetres to metres (dividing by 1000), then divides it by λ. Two useful behaviours to remember:

  • at equal conductivity, doubling the thickness doubles the resistance;
  • at equal thickness, a material that is half as conductive (λ halved) offers twice the resistance.

The resistance of a layer is a building block of the calculation: in a wall, the resistances of the successive layers add up, and the whole determines the U-value through U = 1/R_total. To compose a complete wall, use the U-value calculator.

This tool applies a building-physics formula; it attests to no product performance. The λ = 0.051 value proposed is a declared value (ETA 20/0342) provided as an editable example: Pro-Tech® is a thermal corrector, not a substitute for a certified EWI system (European certification underway). For your project, use the declared λ of the real material, taken from its technical data sheet.

The full definition of the quantity is detailed on the Thermal resistance page. The required U-values vary depending on local regulations.

Call — +351 927 917 736