Training · approval · site

Applicator firms: get trained, get approved, apply by the book

Installing the Pro-Tech® system requires training, an approval and compliance with a precise application specification. In return, you benefit from our technical site assistance and the system warranty, under one non-negotiable condition: never apply over a damp substrate.

What conditions apply to install the system?

To apply Pro-Tech®, a firm must be trained and approved by Isoltech Green, then follow the application specification: substrate diagnosis, preparation, 5 mm passes every 24 h, then the Techdekor Green finish in a coat ≤ 5 mm at 72 h. The non-negotiable condition is a dry substrate: no application over active moisture or untreated rising damp, on pain of warranty exclusion. The system warranty applies only if the application is compliant.

Training and approval

Installing a continuous-coat thermal corrector is a skill: regularity of the passes, management of drying times, treatment of singular points and of the finish. We train your teams on the system and issue an approval that conditions access to the product and to the warranty. The approval protects your site, the client and the reputation of the system.

The application specification

  1. Substrate diagnosis: nature, cohesion, flatness, and above all moisture state. The substrate must be dry and sound.
  2. Preparation: cleaning, making good of defects, bonding treatment according to the substrate.
  3. Pro-Tech® application: in 5 mm passes every 24 h, up to the thickness sized by the design office. Applied thickness always starts at 10 mm.
  4. Techdekor Green finish: in a coat ≤ 5 mm at 72 h, after sufficient drying of the render body.
  5. Checks: thicknesses, appearance, singular points, application weather conditions.
The thicknesses and cadences above are the system's reference points; the total target thickness is the one calculated by the design office (see the design offices page). Always follow the product's current technical data sheet.

The non-negotiable condition: a dry substrate

No application over active moisture. The system is never applied to a wall showing untreated rising damp, infiltration or active moisture. Applying over a damp substrate leads to warranty exclusion and compromises the durability of the works. Moisture is diagnosed and treated before the thermal behaviour.

A damp wall insulates poorly, and a render laid over a wet substrate degrades. If there is any doubt about the moisture state, the application must be deferred until the cause is treated and drying is verified. This is the first site rule, before any other.

Technical site assistance and warranty

We support approved firms on their sites: validation of the substrate diagnosis, technical answers, tricky singular points. The system warranty covers the works subject to compliant application: an up-to-date approval, compliance with the specification, a dry substrate and system products used according to their data sheets. A non-compliant application voids the warranty.

What we bring, what we ask

What we bring

  • Training and approval to install the system;
  • Application specification and technical data sheets;
  • Technical site assistance;
  • System warranty subject to compliant application.

What we ask

  • A dry substrate — never apply over active moisture;
  • Strict compliance with the specification and the cadences;
  • The use of the system products according to their data sheets;
  • Communication with no performance overpromising.

Positioning

Isoltech Green is the European importer and developer of the system; Pro-Tech® is a thermal corrector and not a substitute for a certified EWI system (European certification underway). Communicate in these terms with your clients. The gains in the order of 40 to 60% mentioned are customer feedback, not a guarantee of result; no subsidy is to be promised.

Join the applicator network

Want to get trained and install the system?

Contact us for training, approval and the application specification.

See Pro-Tech®, Techdekor Green, the system and the thermal correction guide. Other trades: architects, design offices, distributors.

Call — +351 927 917 736