Page · price

Price of a thermal corrective render: the factors

What determines the price of a thermal corrective render?

The price of a thermal corrective render depends above all on the surface area to treat, the condition and preparation of the substrate, accessibility (scaffolding, height), the thickness aimed for, the chosen finish and the constraints specific to the site. It is not a catalogue price: every wall and every building is different, so the real cost is costed after an on-site survey, not in advance on a simple declared surface.

The main items that make up the cost

A thermal corrective render quote does not come down to the price of the product. The total cost is split between several items that weigh differently depending on the site.

  • The supply — the corrective mortar itself and its finish. Its share varies with the applied thickness and the nature of the chosen system.
  • Substrate preparation — cleaning, repair, treatment of a degraded or damp wall, making good before application. An often-underestimated item.
  • Labour — continuous-layer application, workmanship time, careful treatment of the singular points (frames, corners, reveals).
  • Site access — scaffolding, platform, protection of the surroundings, means related to height and site configuration.

It is the balance between these items — and not an isolated price per square metre — that explains why two facades of identical surface do not come to the same amount.

The factors that make the cost vary

The table below summarises the main parameters to examine. For each, it indicates in which case it pushes the budget up.

FactorPushes the cost up when…
Surface area to treat… the surface is large, but also when it is small and fragmented: the fixed costs (set-up, access) are then spread over few square metres.
Condition & preparation of the substrate… the wall is degraded, cracked, old or poorly cohesive and requires significant making good before application.
Accessibility & height… the facade is tall, hard to access, in a constrained area, and requires heavy scaffolding or a platform.
Thickness aimed for… the correction objective requires greater thickness, hence more material and more passes.
Type of finish… the desired finish is more elaborate (appearance, colour, texture) or requires additional coats.
Prior moisture survey… the wall shows moisture to treat beforehand: without a sound substrate, the render would not hold its effects.
Constraints & singular points… the site multiplies frames, projections, junctions, heritage constraints or occupancy of the premises.

These factors combine: the same wall can go from a simple site to a complex one depending on its real condition and its environment. That is precisely what a survey brings to light.

Why a quote is made after a survey

Quoting a price "per square metre" without having seen the wall amounts to ignoring half of the items above. The useful thickness, the condition of the substrate and the necessary making good cannot be read from a photo. A thermal correction survey on site allows the existing situation to be measured, any moisture to treat before application to be identified, and the system to be sized. The resulting quote is reliable because it is based on the real wall, not on an assumption. It is also the best protection against unpleasant surprises during the works.

What to compare between two quotes

At a similar headline amount, two quotes can cover very different services. To compare usefully, look at the content before the total.

  • The treated scope — the surface actually covered, singular points included or not, treatment of returns and frames.
  • The preparation included — does the quote include making good the substrate, or will it bill it as an extra once the site is opened?
  • The system and the finish — the nature of the mortar, the planned thickness, the associated finish, the coherence of the whole.
  • The guarantees and references — workmanship guarantees, the seriousness of the company, comparable projects completed.

A cheaper quote that excludes preparation or reduces the thickness is not necessarily the most economical once the site is finished.

Putting the cost in perspective

The price of a thermal corrective render is reasoned in view of what it brings: a less cold wall, improved perceived comfort and, according to our customers' feedback, a noticeable reduction in discomfort and in heating expenditure. These are customer feedback, specific to each situation, and not a quantified guarantee of result. A well-prepared site, applied on a sound substrate and sized after a survey, protects the value of the investment over time — where a botched correction on a poorly prepared wall deteriorates and costs more to redo.

The Pro-Tech® case

The system distributed by Isoltech Green is built on the thermo-active render Pro-Tech®: a 100% natural render applied continuously with no adhesive or fixings, paired with the Techdekor Green finish. Isoltech Green is its European importer and developer (not its manufacturer). The budget of a Pro-Tech® site follows the same factors as above: it is established after a survey, according to the substrate and the correction objective, never from a catalogue. The 40 to 60% gains mentioned by our customers are customer feedback, not a guarantee. Technical details on Pro-Tech®.

A thermal correction project?

The right price goes through a survey of the real wall. Our partners assess your facade and establish a bespoke quote.

Request a survey

Going further

This page complements the Thermal corrective render dossier and the Building thermal correction guide. As the applied thickness is one of the cost levers, the dedicated page details this parameter.

Call — +351 927 917 736