Old-building guide · building & conservation area

Insulating a building with a heritage facade without disfiguring it

How do you insulate a building with a heritage facade?

On a building with a heritage facade, conventional external insulation is often prohibited or discouraged: it would drown the mouldings, cornices and dressed stone. The preferred route is then a breathable internal correction, a thermo-corrective render in low thickness where the heritage authority allows it, and the treatment of accessible thermal bridges. Any intervention requires the agreement of the authorities and of the shared owners.

What is a heritage facade made of?

Old town-centre buildings (19th-century apartment blocks, period facades) show carefully worked facades carrying architectural value:

  • Dressed stone coursed on the street facade, often over a rubble or brick wall behind;
  • Mouldings: cornices, string courses, surrounds, pilasters, balconies, ironwork;
  • Decorative lime renders, sometimes moulded;
  • Exposed or polychrome brick depending on the region and period.

These walls are solid, lime-bedded and vapour-permeable, like all old fabric. The particularity lies in the non-alterable character of the street facade.

Hygrothermal behaviour and issues

Thermally, the old building behaves like other solid walls: strong thermal mass, good summer time lag, but modest winter thermal resistance and a cold inner face. Thermal bridges are numerous (floors, partitions, running balconies) and weigh heavily in the heat losses. Vapour permeability must be preserved, or else damp problems may arise that are difficult to repair on a listed or protected facade.

The constraints specific to heritage

  • Regulatory: conservation areas, settings of listed monuments, the opinion of the heritage authorities; external EWI on a street facade is frequently refused.
  • Architectural: the mouldings forbid any thick coating that would hide them; the material and colour of renders are controlled.
  • Shared ownership: decisions in a general meeting, shares of cost, phasing of the works.
  • Moisture: mandatory respect for the wall's breathing and management of rising damp.
On a protected facade, no solution is committed to without a prior study and the agreement of the competent authorities. Courtyards, gable ends and rear facades that are less visible sometimes offer more latitude than the main facade.

Possible solutions

SituationPossible solutionReservation
Protected street facadeBreathable internal correction, lime render repairExternal EWI generally excluded
Gable ends / rear facadesCorrection or breathable EWI possible if authorisedSubject to heritage opinion and shared owners
Thermo-corrective render in low thicknessOn a non-moulded rendered facade, as part of a re-renderSubject to authorisation, respect for colours
Treatment of accessible thermal bridgesFloors, reveals, internal returnsComplement, not a substitute

The dominant strategy on a protected facade is a breathable internal correction, completed by ventilation and the treatment of accessible junctions. Where a non-moulded rendered facade can be refurbished, a vapour-open external correction in low thickness is sometimes accepted, because it preserves the appearance better than a thick panel EWI.

Pros and cons

Internal correction

Pros: the heritage facade fully preserved, work possible in sections. Cons: loss of space, thermal mass neutralised, floor thermal bridges hard to treat, coordination among shared owners.

External correction in low thickness (if authorised)

Pros: thermal mass preserved, thermal bridges treated, refurbishment and thermal work in one operation, reduced added thickness. Cons: subject to authorisation, excluded where the mouldings must stay legible.

Selection criteria

  • Regulatory status of the facade and heritage opinion: a mandatory starting point.
  • Presence of mouldings to be kept: steers towards internal.
  • Available faces (street, courtyard, gable ends) offering different margins.
  • Shared-ownership decision and financial phasing.
  • Breathability and moisture management, non-negotiable.

Where can a thermo-active render such as Pro-Tech® fit?

Where the regulations and the heritage authority allow a thermal refurbishment in low thickness (non-moulded rendered facade, gable end, courtyard), a panel-free correction system such as the Pro-Tech® thermo-active render (distributed by Isoltech Green across Europe) offers the qualitative advantage of a continuous mineral envelope respecting the wall's breathing, without the added thickness of a panel EWI that would drown the relief. On the protected street facade, the correction most often remains internal. It is an alternative to EWI, especially where EWI cannot be installed.

For transparency, we do not publish any λ, R or U figure attributed to Pro-Tech® outside an identifiable report; the gains reported by our customers (in the order of 40 to 60%) are customer feedback. Any application on protected fabric requires the prior agreement of the authorities. When the facade must keep its mouldings exposed, no external coating — thermo-active or not — is suitable.

Go further

This article complements the thermal correction of buildings guide and the old-building hub. See also the historic building article.

Call — +351 927 917 736