Radiant comfort is the part of thermal comfort that depends on the radiation of the surrounding surfaces — walls, ceiling, floor, glazing. The human body constantly exchanges heat by radiation with these surfaces: when they are warm, it receives heat; when they are cold, it loses heat. Tempered walls improve perceived well-being, even at equal air temperature.
We do not only feel the air temperature: our body emits and receives infrared radiation with all the surfaces around it. A cold wall "draws" our heat by radiation, which explains the sense of discomfort near a poorly insulated wall or a large glazed area in winter, even in air at a good temperature.
The effect of these surfaces is summed up by the mean radiant temperature (MRT): the uniform temperature of a fictitious enclosure that would produce the same radiative exchange as the real environment, seen from a given point. Combined with the air temperature, the MRT builds the operative temperature, which reflects the overall perceived comfort.
The MRT is not the raw arithmetic average of the surfaces: each wall contributes in proportion to the solid angle under which the occupant "sees" it. A large cold glazed bay, very present in the field of view, weighs more than a small wall panel at the back of the room. This is why the occupant's position in the space changes their radiant comfort: near a cold window, the unfavourable radiative effect is far more marked than at the centre of the room.
Even when the mean operative temperature of a room is correct, an imbalance between surfaces can create localised discomfort. This is radiation asymmetry: the difference in radiation temperature between two opposite directions seen by the body.
Typical examples:
This imbalance is felt even if the average is good: one side of the body is "pulled" towards the cold while the other stays warm. Radiation asymmetry is therefore a recognised cause of local discomfort, distinct from the room's average temperature. It adds to the other forms of local discomfort covered by the standards (draughts, temperature difference between head and ankles, a floor that is too cold or too warm), which can trouble an occupant even when the general environment seems satisfactory.
Thermal comfort is assessed by standards that explicitly include the radiative component:
These texts treat radiant comfort as a measurable component of overall comfort, to be managed as carefully as the air temperature.
Raising the inside surface temperature of the walls — by reducing cold zones and thermal bridges — raises the mean radiant temperature and reduces the radiation asymmetry. Radiant comfort therefore improves at equal air temperature, which sometimes allows a lower heating set point for an identical feel. It is one of the expected benefits of a thermal correction of the walls, to be distinguished from a figured performance that depends on each building's context.
| Quantity | Tool / method | What it provides |
|---|---|---|
| Mean radiant temperature (MRT) | Black globe thermometer | Approaches the overall radiative effect at a point |
| Surface mapping | Thermal camera (infrared thermography) | Spots cold walls and imbalances |
| Radiation asymmetry | Plate radiometer / directional measurement | Quantifies the gap between opposite directions |
The black globe remains the reference instrument for approaching the mean radiant temperature, while the thermal camera lets you map the surfaces and locate the cold zones responsible for radiant discomfort.
This page complements the Thermal correction of facades guide.