Twelve clear, sourced guides to identify the thermal bridges in a building, understand their standardised physics (ISO 10211, EN ISO 14683), spot them with thermography and choose the right treatment strategy — without any absolute promise, and with the limits of each approach.
A thermal bridge is a localised area of a building envelope where thermal resistance is lower than elsewhere, creating a preferential path for heat to escape. It occurs mainly at junctions between elements: slab edges, balconies, window reveals, party walls, wall-floor and wall-roof junctions. Its effects are increased heat loss, a localised cold wall, and a risk of condensation and mould. It is quantified by a linear coefficient ψ (W/m·K) or a point coefficient χ (W/K).
This hub complements the pillar page Thermal correction of buildings. Each guide is self-contained: definition, standardised physics, location, orders of magnitude, measurement method and treatment options, along with their limits.
What a thermal bridge is, its types and its consequences.
Frame-to-masonry junction: sill, lintel, reveals.
Reveals and corners: insulation return, condensation.
The intermediate floor that crosses the facade.
Cantilevered slab: the most pronounced thermal bridge.
Base-of-wall junction, slab-on-ground and crawl space.
Wall-roof junction and parapet upstands on flat roofs.
Internal load-bearing wall crossing the envelope.
The L-shaped junction between a vertical wall and a floor.
How external wall insulation ensures continuity.
Internal wall insulation: its limits and use cases.
Detecting thermal bridges with an infrared camera (EN 13187).
A thermal bridge combines three effects that reinforce one another. First, it increases heat loss: depending on local regulations and energy-calculation rules, linear thermal bridges can account for a significant share of the losses of an otherwise well-insulated envelope. It then lowers the internal surface temperature, creating a cold-wall sensation and local discomfort. Finally, at the coldest points, it creates a risk of surface condensation and then mould, with consequences for health and durability. Treating thermal bridges therefore acts at once on the energy bill, on comfort and on the health of the building.
We distinguish treatment by external wall insulation (EWI), which wraps the structure and restores the continuity of the insulation at critical junctions, from internal wall insulation (IWI), which is more economical but leaves residual thermal bridges at floors and party walls. No solution "removes all thermal bridges": the realistic objective is to reduce them strongly by ensuring the continuity of the insulation or the render, then to verify the result by measurement — calculation to EN ISO 14683 / ISO 10211, simulation, or in-situ thermography.
Discover how a thermo-active render applied without panels or joints improves the continuity of the envelope, critical junctions included.